600mm
820mm
600mm
open
Electrical,drain and
water supply line en-
trances must be con-
fined to shaded areas
to avoid interference
with components.
Most of the installation work should be done be-
fore the dishwasher is moved into place .First,se-
lect a location as close to the sink as possible for
ready access to water and drain lines. For proper
operation and appearance of the dishwasher,the
cabinet opening should be square and have dimen-
sions as shown in Fig. 1.lf the dishwasher is to be
installed in a corner,there must be sufficient clear-
ance to open the door as shown in Fig. 2.A mini-
mum clearance of 2" is recommended.
Rough-in the water,electrical,and drain lines before
proceeding with the installation. The lines should
run straight to their connections on the dishwasher.
Note:Make sure that the lines do not cross in
front of the dishwasher motor or its legs.
F i g . 1 .
F i g . 2 .
Installation
