![background image](http://html1.mh-extra.com/html/moulinex/odacio-fp723/odacio-fp723_user-manual_1839999013.webp)
24
- Place the spindle
(c)
onto the bowl
drive
(b3-1)
.
- Slide the emulsifier onto the spindle.
Then:
- Place the ingredients into the bowl.
- Fit the lid
(b2)
or
(d4)
on the bowl.
- Close the upper drive cover
(a1)
.
You should hear it click shut.
Recommended speeds
Tips
- Do not use these accessories to
knead heavy dough or to mix
sponges.
You can prepare: mayonnaise, aioli,
sauces, whisked egg whites (1 to 6),
whipped cream, Chantilly cream (up
to 0.5 litre).
SQUEEZING FRUIT JUICES
(depending on model)
ACCESSORIES USED
- bowl
(b3)
and citrus press
(h)
.
FITTING THE ACCESSORIES
Press the release button (a4)
to open the upper drive cover (a1).
- Place the bowl onto the lower drive
(a3)
.
- Place the drive rod
(h3)
of the citrus
press onto the bowl drive.
- Place the filter basket
(h2)
on the
bowl.
- Place the cone
(h1)
in the hole of the
filter basket.
- Close the upper drive cover
(a1)
.
You should hear it click shut
Recommended speeds
Tips
- Place half a citrus fruit on the cone
(h1)
. You can make up to 1 litre of
juice without emptying the bowl.
SMOOTHIES / BLENDING / FINE
BLENDING
ACCESSORY USED
- blender
(k)
.
FITTING THE ACCESSORY
Press the release button (a4)
to open the upper drive cover (a1).
Direct Service Model with tap:
Cleaning the tap (k6)
To make the tap
(k6)
easier to clean, it
can be dismantled into two parts:
Press " push ", and release the cover
(fig. 6a-1). Clean the tap
(k6)
under
running water. Fit the cover by pressing
the middle of it, then clip on the metal
pin underneath the hooks (fig. 6a-1).
Fitting the tap (k6) onto the blender (k3)
Push the seal
(k5)
as far as possible
onto the neck of the jug, then lock the
assembled tap (
k6
with a quarter
turn).
Tips
: this blender, fitted with its tap,
allows you to pour your preparation,
directly into glasses (cocktails), onto
plates or into bowls (soups) or into
the pan (pancakes). Speed 1 helps you
to serve thick preparations
(milkshakes or smoothies). Stop the
appliance as soon as it has finished.
Clean the assembled tap each time
after each use.
If you do not need the tap, you can
replace it with the stopper
(k7)
(see fig
6a-1), equipped with the seal
(k5)
.
For the two models:
- Place the ingredients in the blender
(k3)
, then lock the lid
(k2)
onto the jug.
- Place the blender assembly
(k)
onto
the upper drive
(a2)
.
You should hear a click.
Recommended speeds
Function
Electronic
Model
Two-Speed
Model
Beating /
Whisking /
Emulsifying
1 to 5
1-2
Function
Electronic
Model
Two-Speed
Model
Squeezing
1
1
5
6
6a
6b
6a1
6a2
Function
Electronic
Model
Two-Speed
Model
Smoothing /
mixing /
blending
1 to 5 - Pulse 1 to 2 - Pulse
Moulf43 27/07/07 8:40 Page 25