- Grapes, quinces or redcurrants: to
obtain better results, clean the filter
after every 300g of ingredients.
- Important:
When the pulp collector is
full, stop the appliance, and empty
the collector.
- Wait until the rotary filter has
completely stopped before removing
the assembly
To remove the centrifugal juice
extractor (m5), press the release
button (a4), and lift off the assembly.
The locking lever (m6) returns
automatically to the open padlock
position .
Model with the filter basket (m10)
Press the release button (a4)
to open the upper drive cover (a1).
- Place the bowl
(b3)
onto the lower
drive
(a3)
. Assemble the filter basket
(m10)
with its filter crown
(m9)
:
lower it into the filter basket to clip it
onto the assembly.
- Lower the filter basket assembly
(m9+m10)
onto the bowl drive
(b3-1)
- Fit the lid
(m8)
onto the bowl.
- Close the upper drive cover
(a1)
.
You should hear a click.
- Insert the foodstuffs into the tube and
slowly press down using the food
pusher
(m7)
.
- Empty the waste regularly from the
filter - basket.
- Do not use more than 250 g of
ingredients (apples, carrots, grapes)
for each operation.
For the two models:
Recommended speeds
Tips
- Peel fruits with thick skins; remove
stones and the core of pineapples.
- It is not possible to extract the juice
from certain fruits and vegetables:
bananas, avocado pears,
blackberries, etc...
- You can prepare juices with different
Function
Electronic
Model
Two-Speed
Model
Centrifuging
5
2
25
Tips
You can add ingredients via the hole
of the cap
(k1)
during the preparation.
Always use your blender
(k)
with its
cover
(k2)
fitted.
- Do not fill the blender with a boiling
liquid.
- Do not use the blender with dry
foodstuffs (walnuts, almonds,
peanuts…).
You can:
- prepare up to 1.5 litres of finely
blended stews or soups, creams,
purées, milk-shakes, cocktails.
- blend any liquid preparations
(pancakes, doughnuts, clafoutis).
- crush ice at max. speed
To remove the blender, hold it by the
handle and press the release button
(a4).
CENTRIFUGING FRUITS and
VEGETABLES
(depending on model)
ACCESSORIES USED
Centrifugal juice extractor with pouring
spout
(m)
or
Bowl
(b3)
and centrifugal juice
extractor with filter basket
(m)
FITTING THE ACCESSORIES
Direct Service Model with pouring
spout (m5)
Press the release button (a4)
to open the upper drive cover (a1).
Place the filter
(m3)
in the centre of
the pulp collector
(m4)
, turn and lock
the lid
(m2)
onto the pulp collector
(m4)
. Hold the locking lever
(m6)
in
the closed padlock position then fit
the assembly, onto the upper drive
(a2)
. You should hear a click.
Slide the pouring spout
(m5)
onto the
pulp collector
(m4)
.
Tips
- Insert the foodstuffs into the tube
and press them down slowly using
the food pusher
(m1)
.
- Chop the fruits into pieces and place
a large glass underneath the spout
(m5)
.
Do not process more than 0.5 kg of
fruits (apples, carrots, grapes) 5 times
consecutively, without allowing your
appliance to cool down completely.
7
7a
7b
Moulf43 27/07/07 8:40 Page 26
