ZU25201e_e.doc / Sep-13
Page 19 / 36
9. Displays and Softkeys
The edit window for all unit parameters can be found on the left side of the screen.
The INPUTS field shows the softkeys to switch the control commands on or off. Display boxes
in the RS column indicate when the corresponding command is set to ON by PC. Display boxes
in the PI/O column indicate that the corresponding command is ON by external hardware.
The boxes in the OUTPUTS field provide information about the state of the unit, where “Status
A” and “Status B” are especially useful to check the counting inputs:
Status A is lit when a counting pulse is detected on input A
Status B is lit when a counting pulse is detected on input B
(with operation modes A+B or A-B only)
The color bar graph displays the actual output state in a range of +/- 100 % of full scale.
Control keys are available for readout, transmission and storage of parameters.
