FM26001c_e.doc / Nov-11
Page 25 / 27
Conclude the installation by clicking to "Finish"
After successful driver installation you have still to assign a serial COM port number to the USB
connection, as shown below:
Select CONTROLS / System / Hardware and open the Device Manager (1).
In the Device Manager, open „Connections (COM und LPT)“ (2)
By double-clicking to „USB Serial Port (COM x)” (3) the window „Properties of USB Serial Port“ will
open
In the menu „Comm. Settings“ (4) set the parameters according to motrona standard (5)
Change over to "Extended Settings" by clicking to „More“ (6), then select a port number between
COM1 und COM4 according to your convenience (7)
Set the Wait Time to 1 msec. (8)
Close all Windows by clicking „OK“
After these steps your PC will be ready to operate with all motrona units providing a USB port
