Ca306_01d_oi_e.doc / Apr-16
Page 8 / 10
Slider 4 defines the most significant digit of the front thumbwheel switches to be transmitted
as a number or a sign:
4
1 2 3
ON
OFF
ON
OFF
OFF: 0...9
4
1 2 3
ON: +/-
The version with a sign (option VZ000) requires slider 4 to be “ON“ at any time!
6.
Setting of unit address, register code and store function
Sliders 1-5 of the 8-position DIL switch will select the unit address of the target device (00-31).
Slider 6 selects only temporary use of transmit data (with no storage to the EEProm), or stores
data to the EEProm for further use even after power down (by transmitting Store EEPROM to
Code C003).
Slider 7 and 8 determine the register codes to be accessed in the target unit. Codes shown in
subsequent list refer to LENZE series 9300 drives. Other code classifications are possible at any
time.
Important note: All DIL switch settings are only read upon initialization and
changes during normal operation will not be recognized! After change of DIL
switch settings, the unit must be powered up again!
4
1 2 3
1 2 3 4 5 6 7 8
GND G
C-
C+
00 : Code 473, Subcode 1
10 : Code 473, Subcode 2
01 : Code 474, Subcode 1
11 : Code 474, Subcode 2
ohne Speicherung im EEProm
0:
no storage to EEprom
mit Speicherung im EEProm
storage to EEprom
1:
Geräteadresse 00-31
Device address 00-31
(Parameter channel 2)
00000
10000
01000
11000
11111