System Features and Functions
The front of the TransTech™ III+ cabinet contains the control panel, the fluid fill neck for adding new
transmission fluid, and the fluid level windows.
Automatic Flow Direction Detection
The TransTech™ III+ is capable of automatically sensing the direction of fluid flow in the
transmission cooling circuit and aligning the flow internally. A dual one way filtration system
ensures that internal filters are never backflushed into a vehicle.
MODE Button
– Press and hold MODE button 5 seconds until the alarm sounds. After releasing the button
will toggle between manually selecting the inlet hose. This feature can be used for troubleshooting service
issues.
MODE LEDS
Fig 1 Indicates flow direction mode is set to automatic but flow direction has not been determined yet. Flow
direction is determined when a service is started.
Fig 1 (flashing) Indicates no flow is detected. Ensure hoses are connected properly and vehicle is turned on.
Fig 2,3 Shows the flow direction as manually selected in either direction.
Fig 4,5 Shows that the flow direction mode is automatic and the flow direction has been determined. The
arrow indicates the flow direction.
LOW
VEHICLE
FLUID
LOW
CLEAN
FLUID
START ENGINE
STOP ENGINE
COMPLETE
SERVICE IN
PROGRESS
STOP
DRAIN
FLOW
DIRECTION
MODE
FILL
EMPTY
WASTE
AUTO
START /
RESUME
FLUID EXCHANGE
TransTech lII+
1