Maintenance Procedures
The following maintenance procedures should be performed on a routine basis:
1.
Drain the unit’s
fuel reservoir and replace the fuel filter after every 30 cleaning services, as described in
the next section.
2.
Clean the exterior with a plastics cleaning agent or similar product to keep the cabinet looking new.
Check the cabinet for dents or impact markings
.
3.
Check all hoses and wires for cuts or frays.
Replacing the unit Fuel Filter
The unit’s fuel reservoir should be drained and the fuel filter replaced after every 30 cleanings to ensure maximum system
performance and pump life.
Drain the Fuel Reservoir
1.
Turn
the
Pressure Adjust
regulator on the control panel clockwise until it is completely closed
.
2.
Attach the unit
to a motor vehicle battery by connecting the
red
battery clip to the positive (
+
) battery
terminal and connect the
black
battery clip to a solid ground point as far from the battery as possible.
3.
Connect the #060-1100 adaptor to the (
red
) output hose. To flush the gasoline from the unit’s
reservoir using the
following procedure:
•
Direct the adaptor on the (
red
) output hose into an appropriate container.
•
Press and hold the
Start
button until the unit’s reservoir is empty.
•
Release the
Start
button.
•
Dispose of the fuel in an environmentally approved method.
