manualshive.com logo in svg

Motorola WT41NO, User Manual

Share
Download
Motorola WT41NO User Manual Download Page 11

ABOUT THIS GUIDE

Introduction

This guide provides information about using the WT41N0 family of mobile terminals and accessories. The WT41N0 
has two versions, one with a display and a voice only version without a display. Throughout this guide Voice Only 
WT41N0 refers to the version without the display and WT41N0 refers to the version with a display.

Documentation Set

The documentation set for the WT41N0 is divided into guides that provide information for specific user needs.

•

WT41N0 Quick Start Guide

 - 

•

Voice Only WT41N0 Quick Start Guide

 - 

•

WT41N0 User Guide

 - describes how to use the WT41N0 wearable terminal.

•

WT41N0 Integrator Guide

 - describes how to set up the WT41N0 wearable terminal and the accessories.

•

EMDK Help File

 - provides API information for writing applications.

NOTE

Screens and windows pictured in this guide are samples and can differ from actual screens.

DRAFT

Summary of Contents for WT41NO





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands