manualshive.com logo in svg

Motorola WPS870G - Wireless Print Server, User Manual, Page: 92 / 115

Share
Download
Motorola WPS870G - Wireless Print Server User Manual Download Page 92

User Guide

 

WPS870G

 

PAGE 85 

Windows 2000/2003 Server 

1 

Click 

Start

 > 

Settings 

>

 Printer 

and start the Add Printer wizard. 

2 

Select 

Network Printer

 then click 

Next 

to browse for the Wireless Print Server. 

3 

Locate and double-click the 

Wireless Print Server

, select the desired port and click 

Next

. The Connect to Printer message is displayed: 

 

Windows 2000 Message 

 

Windows 2003 Message 

4 

Click 

OK

 and select the correct 

Manufacturer 

and 

Model 

for this printer. 

5 

Follow the prompts to complete the installation. 

6 

In the Printers folder, right-click the new printer, and select 

Sharing

. 

7 

Select 

Shared As:

 and enter an appropriate 

name 

for this printer. Users will see this 

name when browsing for the printer during installation. 

8 

If desired, click 

Additional Drivers

 and install printer drivers for other versions of 

Windows, such as Windows 98. This will assist users during the installation process. 

9 

Click 

OK 

to close this Window. Configuration is now complete. 

Client computers can now be configured as described in 

Section 2:Installation

. 

Summary of Contents for WPS870G - Wireless Print Server




















































































































Reviews:

No comments