manualshive.com logo in svg

Motorola WPS870G - Wireless Print Server, User Manual, Page: 56 / 115

Share
Download
Motorola WPS870G - Wireless Print Server User Manual Download Page 56

User Guide

 

WPS870G

 

PAGE 49 

Control Panel 

Control Panel allows you to adjust the password to the WPS870G and to update the unit’s 
firmware. 

Device Security 

Device Security enables you to change the password of the Web-based GUI of the 
WPS870G as well as the Login Idle Time. 

Click 

Control Panel 

to access Device Security. The Device Security window is displayed: 

 

Item Description 

Login Password 

Login Password 
Confirm 

Type a new password. There is a minimum of 0 characters and a 
maximum of 16.  

Enter the password again to confirm you entered it correctly. 

If you ever forget the password, you can reset the WPS870G to 
factory defaults. Refer to 

Test Print and Restore Button

 for further 

details. 

 

Login Idle Time 

This determines how long your connection to the Graphical User 
Interface (GUI) remains alive with no activity. The Login Idle Time 
default is 10 minutes. Type a new figure to change the idle time. 

 

Apply 

Click to save your settings. 

 

Cancel 

Click to cancel any changes. 

 

Summary of Contents for WPS870G - Wireless Print Server




















































































































Reviews:

No comments