manualshive.com logo in svg

Motorola WPS870G - Wireless Print Server, User Manual, Page: 76 / 115

Share
Download
Motorola WPS870G - Wireless Print Server User Manual Download Page 76

User Guide

 

WPS870G

 

PAGE 69 

 

The Locate your Printer window is displayed: 

 

3 

Select 

Connect to a printer on the Internet or on your intranet

 and enter the URL of 

the WPS870G as follows: 

ip_address

 represents the IP address of the IPP Server and 631 is the port number. 

 

Port 1 

(Parallel)

 

ip_address:631/ipp/P1 

 

Port 2 

(USB)

 

ip_address:631/ipp/P2 

Note: These entries are case sensitive. They must be entered as shown, with "ipp" in lower case, and P1 
and P2 in UPPER case. 

 

If the connection can be established and the printer on that port is on-line, the Connect 
to Printer window is displayed to prompt you to install the printer driver. 

 

4 

Click 

OK

 and then select the printer manufacturer and model that matches the printer 

connected to the port on the WPS870G. 

5 

Click 

Next

 and complete the Wizard. 

The IPP printer is now ready for use. 

Summary of Contents for WPS870G - Wireless Print Server




















































































































Reviews:

No comments