Motorola WA9901 Integrator Manual Download Page 43

Page: 43 / 70

RFID Sample Application 4 - 11

Filter

Select

Menu > Operations > Filter

to view/configure the following filters:

•

Pre-Filter

•

Post-Filter

•

Access-Filter

Pre-Filter

Select

Menu > Operations > Filter > Pre-Filter

to view/configure pre-filters.

Figure 4-11

PreFilter Window

This window includes the following fields:

•

Antenna ID

- Selecting an antenna ID updates the configuration values in the other fields.

•

Memory Bank

- Memory bank on which the filter is applied.

•

Offset

- The first (msb) bit location of the specified memory bank against which to compare the tag mask.

•

Tag Pattern

- The pattern against which to compare the specified memory bank.

•

Filter Action

- Select the required filter action. For more information, refer to the Gen2 specification available

http://www.epcglobalinc.org/standards/

Summary of Contents for WA9901







































































Search results

Summary of Contents for WA9901

Reviews:

Related manuals for WA9901

Brands by name

Popular brands

Motorola WA9901, Integrator Manual

Search results

Summary of Contents for WA9901

Reviews:

Related manuals for WA9901

Brands by name

Popular brands