Motorola WA9901 Integrator Manual Download

Page: 59 / 70

Chapter 6 Troubleshooting

Introduction

Table 6-1 on page 6-1

provides troubleshooting information.

Troubleshooting

Table 6-1

Troubleshooting

Problem

Possible Causes

Possible Solutions

Mobile computer does not turn on.

Lithium-ion battery not
charged.

Charge or replace the lithium-ion battery.

Lithium-ion battery not
installed properly.

Ensure the battery is installed properly.

System crash.

Perform a warm boot. If the RFID reader still does
not turn on, perform a cold boot.

Rechargeable Lithium-ion battery
did not charge.

Battery failed.

Replace battery. If the mobile computer still does
not operate, try a warm boot, then a cold boot.

Mobile computer removed
from cradle while battery
was charging.

Insert mobile computer in cradle and begin
charging.

No sound.

Volume setting is low or
turned off.

Increase the volume setting.

Tapping the window buttons or
icons does not activate the
corresponding feature.

LCD screen not aligned
correctly.

Re-calibrate the screen.

Battery is not inserted
properly.

Insert the battery properly.

Summary of Contents for WA9901







































































Search results

Summary of Contents for WA9901

Reviews:

Related manuals for WA9901

Brands by name

Popular brands

Motorola WA9901, Integrator Manual

Search results

Summary of Contents for WA9901

Reviews:

Related manuals for WA9901

Brands by name

Popular brands