73
Chart 10—Base-to-Portable Repeat Failure
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
START
Verify that the VRS750
dip switches are set to
normal operation.
Activate the
VRS750.
Is "VRS
BOTH" displayed
briefly?
Provide an
on-channel RF
signal to the mobile.
The VRS750 is not
enabled and audio
will not be heard.
Is
audio present at
C135?
Is audio
present @ U101 pin
5?
Chekc mobile and
its connection to
the VRS.
Is audio
present @ U101 pin
4?
Check U104.
Adjust R150 if
necessary.
Is
audio present @
TP101?
Verify that the
local mic is not
pressed.
Is
audio present
@ J30-19?
Is pin 10
of U101 HIGH
-9.6VDC?
Is
there continuity
between J30-19 and
J20-7 of the flex
cable?
Replace the
transceiver.
Replace U101.
Is
there continuity
between J30-8 and
J40-23 on the flex
cable?
Is pin
9 of U101 low
(0VDC)?
Repair/replace
U101.
Is
there continuity
between J30-15 and
J40-23 on the flex
cable?
Replace the
transceiver.
Replace the flex
cable.
Check and/or
replace Q106.
Replace the flex
cable.
Repair/replace
Q114.
Replace the flex
cable.
BASE TO PORT. AUDIO ISSUES
Summary of Contents for VRS750
