34
Reset the Remote
To Restore the Factory Default Settings
Silver/Charcoal Remote:
1. Press and hold the
STB/MTS
key and hold the
OK
key simultaneously on the remote control
2. Release both the
STB/MTS
key and the
OK
key – all four mode keys will flash twice indicating programming mode
3. Enter programming code
900
by pressing the number keys on the remote control – the
STB/MTS
key will flash
three times indicating you have successfully entered the code and the remote has been reset to the factory default
settings
Note: If any other key is pressed except the number keys the
STB/MTS
key will give a long red flash and the remote
control will return to normal operation. Should the remote control time-out before you complete the procedure you
will need to start over.
Black MXv3 Remote:
1. Press the
TV
key and while holding it pressed, press the
OK
key for 1 second and release both keys at the same
time
2. All the mode keys will flash and the
TV
mode key light will stay on
3. Press and hold the
DELETE
key for 3 seconds until the
TV
mode key blinks and stays off. The remote control is now
reset to factory default settings. If you want to use the remote control for your TV and other devices, you will need
to setup the
TV
,
DVD
, and
AUX
mode keys
4. If no key is pressed within 30 seconds, the remote control times out. The selected mode key light flashes for 3
seconds and turns off. The remote control returns to normal operation and you will need to start over
Black MXv4 (with MTS logo) Remote::
1. Press and hold
SETUP
until the LED blinks twice
2. Press
981
on the number pad and the LED will blink 4 times
3. Press the mode key (
TV
,
DVD
, or
AUX
) will blink 4 times upon successful unlock
