29
•
On the silver/charcoal remote, when an invalid code is entered, the selected mode key will give a long flash to
indicate that you have not entered the set up code correctly
•
Should the remote control time-out before you complete the code setup, you will need to start over
6. Point the remote control at the programmed device and press the
POWER
key once
•
The device should turn off
•
If it does not turn off, repeat steps 2 through 5 trying each code for your brand until you find the correct code
7. Repeat steps 1 through 6 to program another device
8. Now that your devices are programmed, you can press the appropriate mode key on the remote control to work
with the selected device. To use the remote control for your MTS TV set-top box again, press the
STB
mode key
Program the TV, DVD, or AUX Mode Keys for Ten Popular Brands of Equipment
Black MXv4 (with MTS logo) Remote Only:
•
Press and hold
SETUP
until the mode keys blink twice
•
Press the mode key (
TV
,
DVD
, or
AUX
) for the device you wish to set up. The selected mode key should stay lit
•
Find your device and brand from the charts below and note which number key is assigned to your brand. If your
brand is not listed in the following chart, then try the Direct Code Entry or the
SETUP
key
•
Press and hold the number key assigned to the brand of device you are trying to program
•
Release the key when your device turns off. Setup for that device is complete
•
2 Blinks of the TV, DVD, or AUX mode key = Success
•
1 Blink of the TV, DVD, or AUX mode key = Failure
Program the TV, DVD, or AUX Mode Keys Using the Code Search
If you can’t find a 4-digit code for your device, try using the search function.
Searching on the black MXv3 remotes cannot be performed for any mode key until after that mode key is set-up with a
valid code. So, select any code for the appropriate mode from the code list, program the key using section A, and then
follow the steps below. For example if you’re trying to program a DVD player to the DVD key, but you don’t have the
code, program any DVD code from the list to the DVD key using the steps in section A, then you can follow the steps
below
.
1. Turn on the device you want to control and point the remote at that device
2. Press and hold the mode key (i.e.
TV
,
DVD
, or
AUX
) you want to program
3. Without releasing the selected mode key (i.e.
TV
,
DVD
, or
AUX
), press and hold the
OK
key simultaneously
Remote Control
Number Key
TV Brands
DVD/VCR Brands
Audio Brands
1
Insignia/Dynex
LG
Bose
2
LG
Memorex
Denon
3
Mitsubishi
Panasonic
LG
4
Panasonic
Philips/Magnavox
Onkyo
5
Philips/Magnavox
RCA
Panasonic
6
Samsung
Samsung
Philips
7
Sharp
Sharp
Pioneer
8
Sony
Sony
Samsung
9
Toshiba
Sylvania
Sony
0
Vizio
Toshiba
Yamaha
