LAN Connection Statistics
4-5
T0100-01, Revision B
Release 5.4
Using LAN Connection Statistics
Screen Terms
The Detailed LAN Connection Statistics screen provides the following information:
Term Indicates...
Call
Summary
This field provides information about the following:
• Connection Type: Specifies whether the connection is point-to-
point (PT_to_PT) or GROUP, and whether an SVC or a PVC is
established.
• Connection State: Specifies the current state of the PVC or SVC.
The possible states are: Unconfigured, Calling, Awaiting Call,
Awaiting Data, Connected, Autocall Failure, Software Disabled,
Operator Disabled, Congested.
• Forwarders Connected: Specifies which forwarders are currently
connected to this LAN Connection: Source Route; Spanning
Tree.
• Remote Address: Specifies the called address of the remote WAN
Adapter LAN Connection for connected SVCs. The possible
states are: Blank for PVCs; blank for disconnected SVCs; No
Mnemonic (for autocall SVCs whose mnemonic does not exist in
the Mnemonic Table); Max Attempts (for Autocall SVCs that
reached their autocall maximum attempts count).
• Next Hop IP Address: Specifies the IP address of the next
destination in a path, if the LCON is configured as GROUP (that
is, if it is part of a LANView.)
• Next Hop IPX Node Number: Specifies the IPX next hop node
number if the LCON is configured as GROUP (that is, if it is part
of a LANView.)
• Number of auto call attempts: Specifies the number of times the
WAN Adapter attempted to autocall before it either succeeded or
failed in establishing the connection.
• Last clear cause code: This is the cause code in the call clear
packet last received by the LAN connection, and explains why
the last call was cleared.
• Last clear diagnostic code: This is the diagnostic code in the call
clear packet last received by the LAN Connection and explains
why the call was cleared.
