Motorola V635, Service Manual

Page: 39 / 56

6809490A75-O November 16, 2004 39
Level 1 and 2 Service Manual Disassembly
3. Lift the CLI up to expose the Zero Insertion Force (ZIF) connector (see Figure
22).
4. Pull up on the ZIF connector latch to open it.
5. Carefully slide the CLI display flex cable out of the ZIF connector.
6. Lift the CLI display away from the display module.
7. To replace, place the CLI display flex connector into the ZIF connector.
8. Close the ZIF connector latch to secure the flex cable.
9. Lower the CLI display onto the display assembly.
10. Carefully and gently press the display flex connector into its socket.
11. Replace the camera assembly, flip CLI display assembly, flip assembly,
antenna, SIM, battery, and battery cover as described in the procedures.
041199o
Figure 22. Removing the CLI display flex connector
ZIF Connector
CLI Display Flex
CLI Display