Motorola V635, Service Manual

Page: 35 / 56

6809490A75-O November 16, 2004 35
Level 1 and 2 Service Manual Disassembly
5. Release the latch on each side of the flip assembly (see Figure 17).
6. Disconnect the CLI lens flex connector from the flip assembly PCB located
under the CLI lens assembly.
7. Lift the CLI lens assembly away from the flip assembly (see Figure 18).
8. To replace, align the CLI display lens assembly to the flip assembly.
9. Carefully press the CLI display lens to the flip assembly to lock the latches on
the CLI display lens assembly. Be careful not the damage the CLI display flex
or flex connector while re-assembling the CLI display lens assembly.
10. Insert and tighten the 4 flip assembly screws to torque setting of 1.0 inch
pounds.
11. Slide the flip assembly cover onto the flip assembly.
12. Replace flip assembly, transceiver board, rear housing, antenna, SIM, battery,
and battery cover as described in the procedures.
041189o
Figure 17. Releasing the CLI Lens Assembly Latch
041190o
Figure 18. Removing the CLI Lens Assembly
CLI Lens Assembly Latch