manualshive.com logo in svg

Motorola V600, Service Manual, Page: 34 / 56

Share
Download
Motorola V600 Service Manual Download Page 34

34

 

       October 10, 2003  

6809468A79-O

Disassembly

 V600

Removing and Replacing the Flip Assembly

1.

Remove the battery cover, battery, SIM, antenna, rear housing, and 
transceiver board assembly as described in the procedures.

2.

Remove the knuckle from the flex cable and flip assembly (see Figure 13A).

3.

Carefully slide the display flex cable through the keypad housing assembly 
(see Figure 13b). Avoid damage to the flex cable.

4.

Lift the keypad housing assembly away from the flip assembly. Be careful not 
to damage the display flex cable.

5.

To replace, carefully thread the display flex connector through the slot on the 
keypad housing assembly. Avoid damage to the flex cable.

6.

Place the flip knuckle over the flex cable and align knuckle to keypad housing.

031648o

Figure 13. Removing the Flip Assembly 

Keypad Housing

Display Flex Connector

Flip Assembly

B

Flip Assembly

Flip Assembly Knuckle

Display Flex Connector

Keypad Housing

A

Summary of Contents for V600

























































Reviews:

No comments