Motorola V600 Service Manual Download Page 32 | Manualshive

Page: 32 / 56

Motorola V600 Service Manual Download Page 32

32

October 10, 2003

6809468A79-O

Disassembly

V600

Removing and Replacing the Headphone Speaker Jack

1.

Remove the battery cover, battery, SIM, antenna, and rear housing as
described in the procedures.

2.

Using the disassembly tool, gently pry up on the headphone speaker jack to
remove it from the rear housing as shown in Figure 11. Be careful not to damage
the leads.

3.

To replace, align the headphone speaker jack to the rear housing assembly.

4.

Insert the top end of the headphone speaker jack into the rear housing
assembly.

5.

Press the bottom end of the headphone speaker jack into the rear housing. Be
careful not to damage the headphone jack speaker leads.

6.

Ensure headphone jack speaker leads will contact the transceiver board when
reassembled.

7.

Replace the rear housing, antenna, SIM, battery, and battery cover as
described in the procedures.

Figure 11. Removing the Headphone Speaker Jack

Headset Jack

Rear Housing Assembly

«
...
30
31
32
33
34
...
»

Summary of Contents for V600

























































Reviews:

No comments