Motorola V3682, Quick Reference

Page: 54 / 104

Using the Options Menu
52
a numeric character, all subsequent characters are numeric until
you press
O
.
iTAP - Correcting Text
In iTAP Mode, you can correct the text in the main display area.
You can delete one character at a time or one word at a time.
To move the cursor (l ), press
<
or
>
.
To delete the character before the cursor, press C . You can
then insert any new characters you require.
To delete the word before the cursor, press and hold
C
. If you
continue to press
C
, you delete the next word, and so on,
until you delete all the words.
iTAP - The Dynamic Dictionary
The dynamic dictionary learns the most recent and the most
frequent words that you use. This includes names and acronyms.
If there are words that you do not use frequently, then the
dynamic dictionary deletes these first to make room for new
words or words that are more frequently used.
The language you specify for the phone determines the dynamic
dictionary that it uses (if there is one is available). See
Language
Selection in Phone Setup .
How to Enter Text in Tap Mode
In Tap Mode, each key has a number of different characters
assigned to it. See ‘Table of Characters’. When you press the
same key several times, you scroll through the assigned
characters.
For example, if you press
5
, you display the
J
or
j
character. If
you press the key again, you display the
K
or
k
character, and so
on.
To enter the next character, press the next key that has the
character you require. If the next character is on the same key,
you must first press
>
.
Correcting Text
In Tap Mode, you can delete one character at a time or you can
delete all the text.
To move the cursor (l ), press
<
or
>
.
To delete the character before the cursor, press C . You can
then insert any new characters you require.
To delete all the text, press and hold
C
.
How to Enter Text in Numeric Mode
The keys 0 , 1 to 9 produce numeric characters only.
Correcting Text
In Numeric Mode, you can delete one character at a time or you
can delete all the text.
To move the cursor (l ), press
<
or
>
.
To delete the character before the cursor, press
C
. You can
then insert any new characters you require.
To delete all the text, press and hold C .
ST210_EN.BK Page 52 Thursday, May 11, 2000 2:56 PM