background image

Keyboard Wedge Interface

5 - 7

Ignore Unknown Characters

Unknown characters are characters the host does not recognize. When 

Send Bar Codes With Unknown 

Characters

 is selected, all bar code data is sent except for unknown characters, and no error beeps sound on the 

scanner. When 

Do Not Send Bar Codes With Unknown Characters

 is selected, bar code data is sent up to the 

first unknown character and then an error beep sounds on the scanner.

*

Send Bar Codes with Unknown Characters

(Enable)

Do Not Send Bar Codes with Unknown Characters

(Disable)

Keystroke Delay

This is the delay in milliseconds between emulated keystrokes. Scan a bar code below to increase the delay when 
hosts require a slower transmission of data.

*0 msec (No Delay)

20 msec (Medium Delay)

40 msec (Long Delay)

Summary of Contents for Symbol LS3408



































































































































































































































































































































































Reviews: