manualshive.com logo in svg

Motorola Symbol LS3408, Product Reference Manual

Share
Download
Motorola Symbol LS3408 Product Reference Manual Download Page 4

ii

Symbol LS3408

© 2007 by Motorola, Inc. All rights reserved.

No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, 
without permission in writing from Motorola. This includes electronic or mechanical means, such as 
photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to 
change without notice.

The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on 
a licensed basis. Motorola grants to the user a non-transferable and non-exclusive license to use each 
software or firmware program delivered hereunder (licensed program). Except as noted below, such license 
may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of 
Motorola. No right to copy a licensed program in whole or in part is granted, except as permitted under 
copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with 
other program material, create a derivative work from a licensed program, or use a licensed program in a 
network without written permission from Motorola. The user agrees to maintain Motorola’s copyright notice on 
the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in 
whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed 
program delivered to the user or any portion thereof.

Motorola reserves the right to make changes to any software or product to improve reliability, function, or 
design.

Motorola does not assume any product liability arising out of, or in connection with, the application or use of 
any product, circuit, or application described herein.

No license is granted, either expressly or by implication, estoppel, or otherwise under any Motorola, Inc., 
intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in 
Motorola products.

MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the US Patent & 
Trademark Office. Bluetooth is a registered trademark of Bluetooth SIG. Microsoft, Windows and ActiveSync 
are either registered trademarks or trademarks of Microsoft Corporation. All other product or service names 
are the property of their respective owners. 

Motorola, Inc.
One Motorola Plaza
Holtsville, New York 11742-1300

http://www.symbol.com

Warranty

For the complete Motorola hardware product warranty statement, go to: 

http://www.symbol.com/warranty

.

Patents

This product is covered by one or more patents. For patent information go to:

 http://www.symbol.com/patents

.

Summary of Contents for Symbol LS3408



































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands