Motorola SYMBOL DS3578 Product Reference Manual Download

Page: 154 / 430

7 - 2

DS3578 With FIPS Digital Scanner Product Reference Guide

Connecting a Keyboard Wedge Interface

Figure 7-1

Keyboard Wedge Interface Connection with Y-cable

To connect the keyboard wedge interface Y-cable:

Turn off the host and unplug the keyboard connector.

Attach the modular connector of the Y-cable to the cable interface port on the cradle. See

Connecting the

Cradle on page 1-6

Connect the round male DIN host connector of the Y-cable to the keyboard port on the host.

Connect the round female DIN keyboard connector of the Y-cable to the keyboard connector.

If required, connect the power supply to the cradle.

Ensure that all connections are secure.

Turn on the host system.

Pair the digital scanner to the cradle by scanning the bar code on the cradle.

Select the keyboard wedge host type by scanning the appropriate bar code from

Keyboard Wedge Host Types

on page 7-4

10.

To modify any other parameter options, scan the appropriate bar codes in this chapter.

11.

Connect an external power supply if desired.

Y-cable

Male DIN Host Connector

Female DIN Keyboard

Connector

Keyboard

Connector

NOTE

Interface cables vary depending on configuration. The connectors illustrated in

Figure 7-1

are examples

only. The connectors may be different from those illustrated, but the steps to connect the cradle remain
the same.

NOTE

Disconnect the power supply before changing host cables or the digital scanner may not recognize the
new host.

Summary of Contents for SYMBOL DS3578















































































































































































































































































































































































































































Search results

Summary of Contents for SYMBOL DS3578

Reviews:

Related manuals for SYMBOL DS3578

Brands by name

Popular brands

Motorola SYMBOL DS3578, Product Reference Manual

Search results

Summary of Contents for SYMBOL DS3578

Reviews:

Related manuals for SYMBOL DS3578

Brands by name

Popular brands