Motorola SURFboard SBG901, User Manual

Page: 24 / 130

You must have the latest service packs and patches installed on your computer for your operating
system. You will need 75-ohm
coaxial cable with F-type connectors to connect the SBG901 to the
nearest cable outlet. If a TV is connected to the cable outlet, you may need a 5 to 900 MHz RF
splitter and two additional coaxial cables to use both the TV and the SBG901.
Determine the connection types you will make to the SBG901. Check that you have the required
cables, adapters, and adapter software. You may need:
Item Description
Wireless LAN Wireless adapter and driver software for each computer having a wireless
connection
Wired Ethernet Ethernet cables and network interface cards (NICs) with accompanying
installation software
LAN To connect more than one computer via an Ethernet connection to the SBG901
Precautions
Postpone SBG901 installation until there is no risk of thunderstorm or lightning activity in the
area.
To avoid potential shock, always unplug the power cord from the wall outlet or other power
source before disconnecting it from the SBG901 rear panel.
To prevent overheating the SBG901, do not block the ventilation holes on the sides of the unit.
Do not open the unit. Refer all service to your Internet Service provider.
Signing Up for Service
You must sign up with an Internet Service provider to access the Internet and other online
services. To activate your service, call your local Internet Service provider.
You need to provide the MAC address marked HFC MAC ID printed on the Bottom Label on the
SBG901. You can record it in the SBG901 Install Sheet.
You should ask your Internet Service provider the following questions:
•
Do you have any special system requirements?
•
When can I begin to use my SBG901?
•
Are there any files I need to download after connecting the SBG901?
•
Do I need a user name or password to access the Internet or use e-mail?
2 Getting Started 24
This document is uncontrolled pending incorporation in PDM