Motorola SURFboard SBG901 User Manual Download Page 128 | Manualshive

Page: 128 / 130

background image

The Product is not designed or intended for use in on-line control of aircraft, air traffic, aircraft navigation or aircraft
communications; or in design, construction, operation or maintenance of any nuclear facility. MOTOROLA AND ITS 3RD PARTY
LICENSORS DISCLAIM ANY EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR SUCH USES. YOU REPRESENT AND WARRANT
THAT YOU SHALL NOT USE THE PRODUCT FOR SUCH PURPOSES.

Title to this Software, including the ownership of all copyrights, mask work rights, patents, trademarks and all other intellectual
property rights subsisting in the foregoing, and all adaptations to and modifications of the foregoing shall at all times remain
with Motorola and its 3rd party licensors. Motorola retains all rights not expressly licensed under this License. The Software,
including any images, graphics, photographs, animation, video, audio, music and text incorporated therein is owned by Motorola
or its 3rd party licensors and is protected by United States copyright laws and international treaty provisions. Except as
otherwise expressly provided in this License, the copying, reproduction, distribution or preparation of derivative works of the
Software, any portion of the Product or the documentation is strictly prohibited by such laws and treaty provisions. Nothing in
this License constitutes a waiver of Motorola’s rights under United States copyright law.

This License and your rights regarding any matter it addresses are governed by the laws of the Commonwealth of Pennsylvania,
without reference to conflict of laws principles. THIS LICENSE SHALL TERMINATE AUTOMATICALLY if you fail to comply with
the terms of this License.

Motorola is not responsible for any third party software provided as a bundled application, or otherwise, with the Software.

U.S. GOVERNMENT RESTRICTED RIGHTS

The Product and documentation is provided with RESTRICTED RIGHTS. The use, duplication or disclosure by the Government is
subject to restrictions as set forth in subdivision (c)(1)(ii) of The Rights in Technical Data and Computer Software clause at
52.227-7013. The contractor/manufacturer is Motorola, Inc., 101 Tournament Drive, Horsham, PA 19044.

C Software License

128

This document is uncontrolled pending incorporation in PDM

«
...
126
127
128
129
130
»

Summary of Contents for SURFboard SBG901



































































































































Reviews:

No comments

Related manuals for SURFboard SBG901

Brand: Salus Pages: 2

Brand: Pace Pages: 2

Brand: Mako Pages: 70

Brand: Night Owl Pages: 8

Brand: Ubee Pages: 7

Brand: SST Automation Pages: 32

Brand: NETGEAR Pages: 25

Brand: NETGEAR Pages: 2

Brand: ATX Pages: 84

Brand: BossPac Pages: 26

Brand: QUANTUM X Pages: 56

Brand: 4IPNET Pages: 24

Brand: Hitron Pages: 2

Brand: ZUORA Pages: 7

WirelessHART Fieldgate SWG70

Brand: Endress+Hauser Pages: 138

Brand: 2Wire Pages: 4

HomePortal 5011NV

Brand: 2Wire Pages: 18

Brand: ZyXEL Communications Pages: 617

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands