Motorola SURFboard SBG901, User Manual

Page: 61 / 130

Advanced IP Filtering Page
This page allows you to define which local PCs will be denied access to the SBG901 WAN. You
can configure IP address filters to block Internet traffic to specific network devices on the LAN by
entering starting and ending IP address ranges. Note that you only need to enter the LSB (Least-
significant byte) of the IP address; the upper bytes of the IP address are set automatically from
the SBG901 Configuration Manager’s IP address.
The Enabled option allows you to store filter settings commonly used but not have them active.
Figure 38 Advanced IP Filtering Page
Table 13 Field Descriptions for the Advanced IP Filtering Page
Field Description
Start Address Enter the starting IP address range of the computers for which you want
to deny access to the SBG901 WAN. Be sure to only enter the least
significant byte of the IP address.
End Address Enter the ending IP address range of the computers you want to deny
access to the SBG901 WAN. Be sure to only enter the least significant
byte of the IP address.
Enabled Activates the IP address filter, when selected.
Checkmark Enabled for each range of IP addresses you want to deny
access to the SBG901 WAN.
When done, click Apply to activate and save your settings.
6 Advanced Pages 61
This document is uncontrolled pending incorporation in PDM