Motorola ST7000 Feature User Manual Download Page 89

Page: 89 / 91

Message

Message Description

er incoming and outgoing call and data services are
blocked.

List Empty

There are no programmed entries in the scrolling list. Type
the entry.

List Not Attached

All talkgroups in the scan list are not attached.

List Partially Attached

The scan list is active, but not all talkgroups are attached
to it.

No Service

Your radio is outside coverage. Return to coverage.

Not allowed in repeater
mode

The service or feature is not available in the Repeater
Mode..

My Groups

Is Empty

You cannot view/delete groups when the

My Groups

fold-

er is empty.

Network Trouble

Network problems. Please try again later.

No Answer

The called party does not answer.

No Entries

This message is displayed when accessing an empty list.

No Group

• Attachment failed. Your radio detached from current

talkgroup. Please wait until it attaches again to the cur-
rent talkgroup.

• Displayed when you are out of the normal coverage

area of your selected talkgroup. Please select a new
talkgroup that is valid for your working location.

• Indicates a favorite group was removed from the

Groups

folder.

No List

The network list is empty.

No Selected Scan List

You selected an empty network list.

No Service

Your radio is out of coverage.

Not Allowed To Initiate
Call

You are not allowed to dial a number which is not in the
address book.

Not Allowed To Transmit

Release the

PTT

button and try again later. You are not al-

lowed to send a text message or a status message to a
number which is not in the address book.

Single TalkGroup Only

There is only one programmed entry in the scrolling list.

Overheating, Please Turn
Radio Off

Your radio turns off. Keep it turned off for 5 minutes.

Party Busy

Called radio is busy.

Party Not Available

Called radio is out-of-range or turned off. Please try again
later.

Please Try Again

You could not call.

Please Wait Connecting

A message during startup.

MN002958A01-AF

Appendix C: Troubleshooting

Summary of Contents for ST7000



























































































Search results

Summary of Contents for ST7000

Reviews:

Related manuals for ST7000

Brands by name

Popular brands

Motorola ST7000, Feature User Manual

Search results

Summary of Contents for ST7000

Reviews:

Related manuals for ST7000

Brands by name

Popular brands