Motorola ST7000 Feature User Manual Download Page 26

Page: 26 / 91

Annotation

Description

Audio Connector

The 3.5 mm audio connector supports headset audio and microphone, and PTT
on Motorola Solutions accessories.

USB Connector

The USB Type-C

™

connector supports charging and programming.

Top Microphone

The Top Microphone is activated during high-audio simplex calls.

NOTICE:

When an active KVL device is connected to the radio using the

USB connector, the radio draws current consumption from the KVL device
and starts charging.

Talkgroup Selector

The

Talkgroup Selector

has the following functions:

• Turns on the display when toggled once. Subsequent toggling allows you to

scroll through the talkgroups of the current selected folder on the Idle screen.

• Scrolls through text in the dialing and messaging editors.

NOTICE:

The

Talkgroup Selector

is unlocked when the radio screen is

active.

Hybrid Antenna

LED Coverage Indicator

Shows the coverage status while the radio is transmitting and receiving over the
network.

Earpiece

The Earpiece is active during low-audio simplex or duplex calls.

Proximity Sensor

Disables the display and

Touch User Interface

during full duplex calls to avoid

unintended presses on the touch buttons.

PMOLED Display

The 1.54-inch screen features a monochrome display with a resolution of 128 x
64 pixels. The screen consists of a two-line display area with the top line showing
radio icons and the bottom line showing text.

Touch User Interface

The four touch sensitive menu icons allow you to navigate the menu.

or Down

menu icon

Used to navigate within the menu hierarchy or to edit alphanumeric text in the di-
aling and messaging editors.

Back

menu icon

The

Back

button has the following functions:

• Returns to the previous menu or deletes the last entered character in the dial-

ing and messaging editors when pressed once.

• In the dialing and messaging editors, pressing and holding the button clears

the entire main text area.

MN002958A01-AF
Chapter 2: Getting Started

Summary of Contents for ST7000



























































































Search results

Summary of Contents for ST7000

Reviews:

Related manuals for ST7000

Brands by name

Popular brands

Motorola ST7000, Feature User Manual

Search results

Summary of Contents for ST7000

Reviews:

Related manuals for ST7000

Brands by name

Popular brands