Motorola SGSW-2620, User Manual, Page: 10 / 68

17 using your car kit
disconnecting the car kit
from your Bluetooth
device
The Bluetooth connection between the car kit and
Bluetooth device is automatically disconnected when
you turn off the vehicle. When the vehicle is powered
down, the call is seamlessly transferred to the phone.
To do this... Do this...
Manually
disconnect
the car kit
from your
device
Press and hold red (END) button for
2-6 seconds while not in a call.
This disconnects the last
connected device, and the car kit
begins searching for the next
available device in its history list.
If there are no other devices
available, the car kit continues to
look for any previously paired
device.
If you desire to reconnect the
device that was just disconnected,
you must initiate the Bluetooth
connection from the device.
See your device’s instruction
manual for details.
18 using your car kit
Remove all
paired
devices from
the car kit’s
history list
Press and hold red (END) button for
6 seconds or longer while not in
a call.
Once a device has been removed
from the car kit’s history list, it
must be re-paired again before it
can be used. See “initial pairing” on
page 12 for instructions on pairing.
To do this... Do this...