Motorola PMPN4119, User Manual

Page: 11 / 160

9
Englis
h
Charging Procedure
1. Plug the power cord into the power receptacle located at the
bottom of the charger.
2. The charger lights up in a Single Green Flash once when the
wall receptacle end of the power cord is plugged into an
appropriate AC outlet.
3. When the battery is properly inserted into the pocket, the
charger indicator lights up Steady Red to indicate the battery
is charging rapidly. When the battery is fully charged, the
charger indicator changes to
Steady Green . Refer to Table 2
for more information.
4. When the device is properly slided into the charger pocket,
see the device indication for charging status. Ensure
complete contact between the charger and device contacts.
5. Use both hands to remove a device or battery from the
charger pocket. One hand to hold and support the charger
while the other hand to remove the device or battery.
Troubleshooting
Table 2: Charger LED Indications
Status LED Status Indication
Power On
Green for approximately
one second
Charging Steady red
Charging >90 % Flashing green
Fully Charged Steady green
Error Flashing red
Standby Flashing yellow
MN003079A01.book Page 9 Monday, August 22, 2016 10:06 AM