Motorola MXP600 Feature User Manual Download Page 27

Page: 27 / 164

Feature

Description

• your radio returns to the original talkgroup.

• your radio restarts the timer before returning to the previously

selected talkgroup.

• no action on your radio, depending on the configuration.

After the timer expires, your radio returns to the previously selected
talkgroup.

Toggle Backlight

Toggles the backlight on or off.

Toggle Backlight Intensity

Regulates the backlight intensity.

Toggle Bluetooth Discov-
erable Mode

Turns Discoverable Mode on or off.

Toggle Bluetooth GATT
Sensor MMI Alerts

Toggles Bluetooth GATT Sensor MMI Alerts on or off.

Toggle BSI Encryption En-
abled or Disabled

Enables or disables BSI encryption.

Toggle Call Forwarding

Toggles Call Forwarding on or off.

Toggle Car Kit Speaker
Permanent On or Off

Permanently turns the Car Kit speaker on or off.

Toggle DMO or TMO

Toggles between TMO and DMO modes.

Toggle Extra Zoom

Turns Extra Zoom on or off.

Toggle Hi or Low Audio

Toggles audio between the external earpiece and the main speaker.
Hi or Low Audio is the default function for the lower

Side

button. This

feature is supported in emergency Full Duplex Private Calls (FDPC)
mode. Press the One-Touch Button to toggle high or low audio state
during incoming or outgoing emergency FDPC.

Toggle Horn and Lights

Toggles the horn and lights indication. Available only in Car Kit mode
if the Horn and Light feature is enabled.

Toggle Howling Suppres-
sion

Enables or disables Howling Suppression.

Toggle Man Down On or
Off

Turns the Man Down feature on or off.

Toggle RF Power Class

Toggles the RF Power Class between high and normal.

Toggle Remote Speaker
Microphone (RSM) with
Earpiece

Activates or deactivates the RSM earpiece.

Toggle Screen Saver

Activates or deactivates the Screen Saver feature.

Toggle Speaker During
Call

Enables or disables the loudspeaker during a call. Available only in
Car Kit mode.

Toggle Talkgroup Scan

Turns the Talkgroup Scan feature in TMO Mode on or off.

Toggle Transmit Inhibit
Mode (TXI)

Turns TXI on or off.

Turn Bluetooth Indoor Lo-
cation On or Off

Activates Bluetooth Indoor Location.

MN006360A01-AE

Chapter 3: MXP600 Radio Overview

Summary of Contents for MXP600




































































































































































Search results

Summary of Contents for MXP600

Reviews:

Related manuals for MXP600

Brands by name

Popular brands

Motorola MXP600, Feature User Manual

Search results

Summary of Contents for MXP600

Reviews:

Related manuals for MXP600

Brands by name

Popular brands