Motorola MXP600 Feature User Manual Download Page 19

Page: 19 / 164

Message

Message Description

Please Try Again

You could not call.

Please Wait Connecting

A message during startup.

Radio Disabled

Check with your service provider.

Radio time not updated

Check for Wi-Fi update triggered from Menu failed be-
cause radio time is not set. Update your radio time to the
current date and time. If error still occurs, contact service.

Registration Failure

Your radio could not register within the system. Please try
again later.

Repeater available

Your radio has connected to a repeater.

Repeater not available

Your radio cannot connect to a repeater, or connection has
been lost.

SD card is not available

The microSD card is damaged or missing (only applies to
radios that support microSD cards).

Service Denied

Invalid number. Call your service provider.

Service Not Available

This service is not available on the current network.

Service Restricted

• This service or feature is restricted by your service pro-

vider, it has not been purchased, or it is not available.

• Check for Wi-Fi update triggered from Menu failed be-

cause there is an in-progress LMR OTAP job. Com-
plete the LMR OTAP job before trying again.

Single TalkGroup Only

There is only one programmed entry in the scrolling list.

TalkGrp

...

cannot be deleted

Your service provider set this group so you cannot delete it
from the favorite talkgroup folder.

This group already exists

The group you are attempting to add exists in the

Groups

folder.

Try Again Later

The requested service is temporarily unavailable.

Unit is OK

Warn:

Self-test error. A minor fault has been detected. Your radio
is still fully operative. If this error recur, note the error code
and contact service.

Unit Not Attached

Your radio could not attach to the system. The talkgroup
may not be defined in the system. Please try another
group.

Warning SD card not format-
ted correctly

The microSD card installed in your radio is not formatted
correctly. To format it, contact your service provider.

Warning: Space for less
than 10 picture signatures
left!

Radio internal memory is running out of space and no
more than 10 Digital Fingerprints can be saved.

Wi-Fi not connected

Check for Wi-Fi update triggered from Menu failed be-
cause radio is not connected to any Wi-Fi access point.

Not enough space to store
picture signature!

Radio internal memory is full and no Digital Fingerprint can
be saved.

MN006360A01-AE

Chapter 2: Radio and Battery Care

Summary of Contents for MXP600




































































































































































Search results

Summary of Contents for MXP600

Reviews:

Related manuals for MXP600

Brands by name

Popular brands

Motorola MXP600, Feature User Manual

Search results

Summary of Contents for MXP600

Reviews:

Related manuals for MXP600

Brands by name

Popular brands