Motorola MW810, Installation Manual

Page: 48 / 80

38 MW810 Mobile Workstation Vehicle Installation Manual
Display Connection
The standard RGB interface connection is used for the primary display unit and DVI
interface for the secondary display (option VA00385AA).
The CPU Box graphics controller support resolutions up to 1280 x 1024 and the
simultaneous operation of two monitors, the analog RGB (DISPLAY1 connection) and
digital DVI (DISPLAY2 connection).
Use only Motorola original integrated molded cables for connection to the MW810 Mobile
Workstation display or to 3rd-party LCD, CRT or Flat Screen displays.
The MW810 Mobile Workstation displays have available USB 2.0 ports supporting transfer
rates up to 480 MB/s. When the CPU is connected to the old MW800 display, only USB 1.1
performance can be provided.
Table 6 details the pin layout of the
DISPLAY 1
connection
The CPU Box graphic controller supports resolutions up to 1280x1024.
When using MW810 display, XGA resolution (1024 x 768) is
recommended.
Table 6
DISPLAY 1 Connection - Pin Layout
Pin No. Signal
1 Red
2 Green
3 Blue
4 VSYNC
5 USB_5+
6 USB_5-
7 LINE_OUT_L
8 LINE_OUT_R
9 MIC2+
10 5V_SUS
11 PRIM_DISP_ON_BTN#
12 V5_SUS
13 DISPLAY_LID#
14 DDCCLK_DATA
15 DDCCLK_CRT
16 N.C
17 N.C
18 GND
Note