Motorola MTP830 User Manual Download Page 79

Page: 79 / 108

Setting Font Level

When and where to use:

To increase/decrease text size so you can adjust the interface readability to existing

conditions.

Procedure:

From the home screen, press the

key.

Select

Setup

→

Display

→

Font Level

Select one of the following:

•

– small font size

•

– medium font size

•

– large font size

Note:

In some languages number of available font levels can be limited.

Setting Large Idle Font

When and where to use:

To enable/disable large font on the home screen.

Procedure:

From the home screen, press the

key.

Select

Setup

→

Display

→

Large Idle Font

Select

to enable, or

Off

to disable displaying large font on the home screen.

Note:

Large Idle Font is not available in some languages.

Setting Extra Zoom

Enabling Extra Zoom simultaneously changes three settings: switches

Font Level

to the largest possible one,

activates

Large Idle Font

, and sets

Extended Status Icons

Idle Only

If you modify any of these settings, for example decrease the font level, the radio leaves the Extra Zoom Mode.
However, to restore all the three previous settings, you need to manually change the values of

Font Level

Large Idle

Font

, and

Extended Status Icons

. If you cannot restore a setting, contact your service provider.

Procedure:

From the home screen, press the

key.

Select

Setup

→

Display

→

Extra Zoom

Select

to enable or

Off

to disable extra zoom.

Note: Extra Zoom

is not available on radios using the SIM card encryption.

Setting Extended Status Icons

Procedure:

From the home screen, press the

key.

Select

Setup

→

Display

→

Extended Status Icons

Select one of the following:

•

Disabled

– the radio always displays icons in normal size.

•

Idle Only

– the radio displays enlarged icons only on the home screen.

Main Menu |

| |

Send Feedback

Summary of Contents for MTP830












































































































Search results

Summary of Contents for MTP830

Reviews:

Related manuals for MTP830

Brands by name

Popular brands

Motorola MTP830, User Manual

Search results

Summary of Contents for MTP830

Reviews:

Related manuals for MTP830

Brands by name

Popular brands