Motorola MTP830 User Manual Download

Page: 47 / 108

DMO

TMO

When the radio connects to a gateway, it plays a tone, displays the

Gateway available

message and shows an

appropriate icon. When the radio looses connection with the gateway, it plays a tone, displays the

Gateway not

available

message, and the gateway icon is blinking.

Selecting DMO Group Call Options

When and where to use:

Helps to communicate with other radio users on the same talkgroup through the Gateway or

Repeater.

Procedure:

From the home screen, press

Optns

Press

Config

Select one of the following:

•

MS - MS

— Your radio can communicate only with other radios within its range.

•

Gateway

— Your radio uses a gateway to communicate with the infrastructure.

•

Automatic

— Your radio uses the first available gateway for that talkgroup.

•

Specific

— Your radio uses only the Gateway with the specified Gateway address for that talkgroup. If

your radio displays

Selected Gateway:None

, press

Edit

to enter the current gateway address.

•

Repeater

— Uses the first available repeater for that talkgroup.

•

GW + Rep

— Uses the first available gateway or repeater for that talkgroup.

•

Automatic

— Uses the first available gateway for that talkgroup.

•

Specific

— Uses only the Gateway with the specified Gateway address for that talkgroup. If your radio

displays

Selected Gateway:None

, press

Edit

to enter the current Gateway address.

Note:

When the Gateway and the Repeater cannot be communicated even though a talkgroup to use

them is configured, the radio attempts the direct MS-MS communication.

When your radio detects the appropriate Gateway and/or the Repeater, the Gateway and/or Repeater icons turns solid,
respectively.

Transmit Inhibit Mode

The Transmit Inhibit Mode is a mode in which the radio sends no radio transmissions. It is recommended to activate
the mode in RF sensitive areas, for example hospitals, airplanes, where safety can be jeopardized due to transmission
radiation.

Modes |

| |

Send Feedback

Summary of Contents for MTP830












































































































Search results

Summary of Contents for MTP830

Reviews:

Related manuals for MTP830

Brands by name

Popular brands

Motorola MTP830, User Manual

Search results

Summary of Contents for MTP830

Reviews:

Related manuals for MTP830

Brands by name

Popular brands