Motorola MTP830 User Manual Download Page 74

Page: 74 / 108

Set Volume

This menu item allows you to adjust the

Simplex

Duplex

Earpiece

Speaker

, and

Keypad

tone volume.

Related Links

Volume Adjustment Mode

on page 76

Setting Volume

Procedure:

From the home screen, press the

key.

Select

Setup

→

Set Volume

Select one of the following:

•

Duplex Vol

— sets the volume level for duplex ringtones.

•

Simplex Vol

— sets the volume level for simplex ringtones.

•

Earpiece Vol

— sets the volume level for the earpiece.

•

Speaker Vol

— sets the volume level for the speaker.

•

Keypad Vol

— sets the volume level for keypad tones.

Note:

If the display shows only one option

Volume

, you can adjust all of the above settings at once.

You have the option to change the settings individually when the

Volume Adj. Mode

is set to

Individual

Press right or left N

AVIGATION

key to change the value.

Note:

When the battery level is low it is not recommended to attach the 4 Ohm speaker to the radio as it

can cause reset or shutdown of the radio.

Related Links

Setting Volume Adjustment Mode

on page 76

Language

This sub-menu allows you to change the language of the radio.

Setting Language

Procedure:

From the home screen, press the

key.

Select

Setup

→

Language

Select desired language.

Data Setup

This menu item allows you to set up your radio to transmit and receive data from the external device.

To connect your radio accessory connector to the external device, use the PMKN4025 cable. The external device
must run an application complying with the TETRA standards.

Note:

• Data services are available only in TMO Mode.
• Data services are blocked in TXI Mode.
• When set to

Voice Only

, the built in data modem is disabled to conserve battery power.

| Main Menu

Send Feedback

| |

Summary of Contents for MTP830












































































































Search results

Summary of Contents for MTP830

Reviews:

Related manuals for MTP830

Brands by name

Popular brands

Motorola MTP830, User Manual

Search results

Summary of Contents for MTP830

Reviews:

Related manuals for MTP830

Brands by name

Popular brands