Postrequisites:
Each time you turn on the terminal, PIN code is required.
4.7.1.2
Changing PIN Codes
NOTICE:
This feature is only available when enabled by your service provider.
Procedure:
1
From the home screen, press the
Menu
key.
2
Select
Security
→
Change Code
.
3
Radio prompts for the
Old Code
.
NOTICE:
By default the PIN code are all zeros (depending on the length of the PIN
code). For radios with general PIN authentication, the PIN length is a fixed 4-digit code.
For radios with BSI PIN authentication, the PIN length is configurable by your service
provider up to a maximum of 8-digit code.
4
If the entered code matches the old code, radio prompts for the new code twice.
Your radio displays
Code Accepted
.
4.7.2
Setting Keypad Lock
The keypad lock/unlock can be invoked from the radio menu, or by using a predefined menu shortcut.
By default, the
Power
and
Emergency
buttons are always operative when the keypad is locked.
Procedure:
1
To unlock, perform one of the following actions:
• Press
Menu
→
*
.
2
To lock, press
Menu
and select
Security
→
Keylock Setup
→
Lock Keypad
.
4.7.2.1
Keypad Lock Notification
When the keypad is locked, your service provider can configure one of the following instructions:
None
No notification is displayed.
Notification Only
Keys Locked
is displayed.
Notification and Instruction
Press Menu * to lock/unlock keypad
is displayed.
4.7.2.2
Setting Automatic Keylock Delay
Procedure:
1
From the home screen, press the
Menu
key.
2
Select
Security
→
Keylock Setup
→
Delay
.
3
Use
Up
and
Down
Navigation keys to change the minutes and press
Done
.
68015000899-FH
Chapter 4: Main Menu
88
