Motorola MTP3250 Feature User Manual Download

Page: 94 / 157

•

DMO Simplex

– To set the new ring style to all Direct Mode Operation (DMO) simplex calls.

NOTICE:

Upon entry into this sub-menu, the display shows the current ring style used.

Scroll to the desired style and press

Select

NOTICE:

New ring style is played immediately for a few seconds. If necessary, adjust the

volume level.

4.8.2

Set Volume

This menu item allows you to adjust the Speaker and Earpiece tone volumes.

4.8.2.1

Setting Volume

Procedure:

From the home screen, press the

Menu

key.

Select

Setup

→

Set Volume

Select

Speaker

Earpiece

Select one of the following options:

•

Voice Vol

– Sets the volume level for voice.

•

Duplex Vol

– Sets the volume level for duplex ringtones.

•

Simplex Vol

– Sets the volume level for simplex ringtones.

•

Keypad Vol

– Sets the volume level for keypad tones.

•

Tones Vol

– Sets the volume level for alert tones.

•

Call-Out Vol

– Sets the volume level for Call-Out tones (if enabled).

NOTICE:

If the display shows only one option

Volume

, you can adjust all of the above

settings at once. You have the option to change the settings individually when the

Volume Adj. Mode

is set to

Individual

Press

Right

Left

Navigation key to change the value.

NOTICE:

When the battery level is low it is not recommended to attach the 4 Ω speaker

to the radio as it can cause reset or shutdown of the radio.

4.8.3

Language

This sub-menu allows you to change the language of the radio.

4.8.3.1

Setting Language

Prerequisites:

The list of available languages is set by service provider.

Procedure:

From the home screen, press the

Menu

key.

Select

Setup

→

Language

Select desired language.

68015000899-FH
Chapter 4: Main Menu

Summary of Contents for MTP3250





























































































































































Search results

Summary of Contents for MTP3250

Reviews:

Related manuals for MTP3250

Brands by name

Popular brands

Motorola MTP3250, Feature User Manual

Search results

Summary of Contents for MTP3250

Reviews:

Related manuals for MTP3250

Brands by name

Popular brands