Motorola MPC564EVB, User Manual

Page: 27 / 98

MPC564EVB User’s Manual 1-17
Communication Ports
On the MPC56x devices, some of the Nexus signals are shared with other pin functions. MPC56x
Signal Sharing shows the Nexus signal versus the MPC561/562/563/564 pins.
.
MDI[0] MDI0 IN
2
15 16 — GND GND
MCKI MCKI IN
2
17 18 — GND GND
MDO[0] MDO0 OUT 19 20 — GND GND
MCKO MCKO OUT 21 22 — GND GND
LWP[1] /EVTO OUT 23 24 — GND GND
MSEO /MSEO0 OUT 25 26 IN or
OUT VENDOR_IO0 LWP[0]
MDO[1] MDO1 OUT 27 28 — GND GND
MDO[2] MDO2 OUT 29 30 — GND GND
MDO[3] MDO3 OUT 31 32 — GND GND
MDI[1] MDI1 IN
2
33 34 — GND GND
— /MSEO1 OUT 35 36 — GND GND
MDO[4] MDO4 OUT 37 38 — GND GND
MDO[5] MDO5 OUT 39 40 — GND GND
MDO[6] MDO6 OUT 41 42 — GND GND
MDO[7] MDO7 OUT 43 44 — GND GND
— MDI2 IN
2
45 46 — GND GND
— MDI3 IN
2
47 48 — GND GND
EPEE & B0EPEE
3
VENDOR_IO1 IN or
OUT
49 50 — GND GND
1
The Nexus specification labels active low signals with a forward slash (/) before the signal name.
2
The Nexus standard recommends that inputs should have 10K
:
pull-up resistors to VREF (2.6 volts).
Exception: The RSTI input should have a 10K
:
pull-down resistor. This is in line with the proposed new
standard.
3
This signal is needed only if control of EPEE or B0EPEE is required by the Nexus tool.
Table 1-7. MPC56x Signal Sharing
Nexus Signal
MPC561/562/563/564
Signal Ball
/RESET HRESET W23
/RSTI JCOMP/RSTI L1
Table 1-6. MPC56x Nexus 50-Pin Definition (Full-Port Mode) (Continued)
MPC56x
Signal
Nexus Auxiliary
Signal
I/O
Pin
Number
Pin
Number
I/O
Nexus Auxiliary
Signal
MPC56x
Signal