Motorola MOTOwi4 25600, Hardware Installation

Page: 31 / 106

Manual Order Chapter 1: Overview
Manual Order
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
This section outlines the content of this manual.. The appendices provide additional information
about installation not otherwise covered in the chapters.
Chapter 1 – Overview
This is a brief outline of the manual. It also provides a list of additional
documents and tools necessary to complete the procedures.
Chapter 2 – Site Preparation
This chapter contains the information for site verification
and shipping and handling of the hardware.
Chapter 3 – Cable Descriptions
This chapter contains general information on the cabling
available for the BCU and RF Head.
Chapter 4 – Indoor Ground-based Access Point (GAP) Hardware Installation
This chapter contains general information and procedures for installing the indoor (19 - inch
rack) version of the Ground-based Access Point (GAP) ardware
Chapter 5 – Outdoor Ground-based Access Point (GAP) Hardware Installation
This chapter contains general information and procedures for installing the outdoor (weather -
resistant cabinet) version of the Ground-based Access Point (GAP) ardware
Chapter 6– Optional Equipment
Chapter 7– What’s Next
This chapter contains general information and procedures for
installing optional equipment.
Chapter 8– XXXXXXXXX
This chapter contains general information and procedures for site
clean up and installation checklist.
Appendix A – Alternate RF Head Installation Procedure
This appendix contains
general information and alternate procedures for RF Head installation.
Appendix B – Alternate RGPS Installation
This appendix contains general information
and alternate procedures for RGPS installation.
Appendix C – MMI Cable Fabrication
This appendix contains general information and a
procedure for manufacturing an MMI cable if the SLN2006A Kit is not available.
1-4 68P09286A73-1
PRELIMINARY - UNDER DEVELOPMENT
JUL 2007