Motorola MOTOwi4 25600, Hardware Installation

Page: 24 / 106

FCC requirements
FCC requirements
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
Content
This section presents Federal Communications Commission (FCC) Rules Parts 15 and 68
requirements and compliance information for the (WAP25400) MOTOwi4™ Diversity Access
Point .
Radio frequency exposure
This equipment is designed to generate and radiate radio frequency (RF) energy. It
should be installed and maintained only by trained technicians. Licensees of the
Federal Communications Commission (FCC) using this equipment are responsible for
insuring that its installation and operation comply with FCC regulations (47 C.F.R. &
1.1310) designed to limit human exposure to RF energy.
FCC Part 15 requirements
Part 15.19a(3) - Information to user
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation
68P09286A73-1 13
JUL 2007
PRELIMINARY - UNDER DEVELOPMENT