Web Page Reference
117
For example, when histogram 1 fills up and starts to overflow the first minute of overflow is analyzed
and the maximum, minimum and mean over that minute are computed and inserted into histogram
2. When histogram 2 fills up and starts to overflow the first hour of overflow is analyzed and the
maximum, minimum and mean over that hour is computed and inserted into histogram 3. When
histogram 3 starts to overflow, the overflow data is simply discarded.
8.3.11.1
Diagnostic Plotter
New for the PTP 500 Series is the system administration diagnostic plotter facility see
:
Figure 71
Diagnostic Plotter
The diagnostic plotter allows the system administrator to view the cascading histogram data in
an easily accessible graphical form. The plot always displays three traces, maximum, minimum
and mean by default. The diagnostic selector allows the user to select the various categories of
histogram.
The histograms that are available are:
•
Vector Error
•
Rx Power
•
Tx Power
•
Signal Strength Ratio
•
Link Loss
•
Rx Data Rate
Summary of Contents for MOTOWI 4
