Motorola MOTOMESH 1.2, User Manual

Page: 15 / 70

6881011Y52-D January 2007
2-1
Chapter
2
Chapter 2: Software Installation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
This chapter will assist you with the software installation portion of the process and is further separated
into two main sections:
Installing MOTOMESH Client Software on Windows XP and Installing
MOTOMESH Client Software on Windows 2000 .
Installing MOTOMESH Client Software on Windows XP
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
The following procedure outlines the installation of the MOTOMESH client software on a typical
Windows XP platform. Some of the steps may vary slightly based on the configuration of the
individual computers.
If you are running Windows XP Service Pack 2 (SP2), Windows Firewall is
turned on by default. It is recommended that you disable the firewall when
using your Wireless Modem Card.
Procedure 2-1 MOTOMESH Client Software Installation on Windows XP
1 Close and exit any existing MOTOMESH applications running on the computer prior to installation.
2
Insert the Software and Documentation CD into the CD-ROM drive.
3
If the installation program does not start automatically, open the Windows Start menu. Click on Run
then type the following into the dialog box:
d:\setupmotomeshclient.exe
where
d:
specifies the CD-ROM drive and click the
OK
button.
4
Click the Next button to continue the installation process.
5 The MOTOMESH Setup dialog box will be displayed as shown in Figure 2-1.