Motorola Motomesh 1.0, User Manual

Page: 31 / 51

MOTOMESH 1.0 Mesh Wireless Router Users Guide
6881011Y53-O September 2005
3-15
Field Name Field Description Field Default
Value
Group ID
The specified Group ID is used for authentication control between local
subscriber devices when communicating in peer-to-peer mode. Group
Group
Password The password used between local subscriber devices that belong to the
same assigned group and share the same password. blank
Viewing the MWR Configuration Page as a Normal User
When a Normal User logs into the Device Administration web interface, the Configuration page
contents will be the same as when viewed by an administrator account. The only difference is that
Normal users can
ONLY change the Bridge Addressing scheme to Statically Provisioned and enter
specific IP addresses if needed or requested by a Network Administrator.
Please note that the default addressing scheme is set to Network DHCP and selecting the Statically
Provisioned mode will allow for field entry into the previously inactive (grayed-out) fields in that
section of the web page.
When making changes to the Bridge Addressing section be sure to select the Apply button to initiate
the changes and then follow on-screen prompts to complete the process.
Figure 3-4 MWR Configuration Page (Normal User Account)