manualshive.com logo in svg

Motorola MOTO U9, Service Manual

Share
Download
Motorola MOTO U9 Service Manual Download Page 6

6

 

 April 01, 2008

6809513A81-A

U9 GSM

Computer Program Copyrights

The Motorola products described in this manual may include Motorola computer 
programs stored in semiconductor memories or other media that are copyrighted 
with all rights reserved worldwide to Motorola. Laws in the United States and other 
countries preserve for Motorola, Inc. certain exclusive rights to the copyrighted 
computer programs, including the exclusive right to copy, reproduce, modify, 
decompile, disassemble, and reverse-engineer the Motorola computer programs in 
any manner or form without Motorola's prior written consent. Furthermore, the 
purchase of Motorola products shall not be deemed to grant either directly or by 
implication, estoppel, or otherwise, any license or rights under the copyrights, 
patents, or patent applications of Motorola, except for a nonexclusive license to use 
the Motorola product and the Motorola computer programs with the Motorola 
product.

About This Service Manual

Using this service manual and the suggestions contained in it assures proper 
installation, operation, and maintenance of U9 telephones. Refer questions about 
this manual to the nearest Customer Service Manager. This manual contains 
mechanical service information required for the equipment described and is current 
as of the printing date.

Audience

This document aids service personnel in testing and repairing U9 telephones. 
Service personnel should be familiar with electronic assembly, testing, and 
troubleshooting methods, and with the operation and use of associated test 
equipment.

Scope

This manual provides basic information relating to U9 telephones, and also to 
provide procedures and processes for repairing the units at Level 1 and 2 service 
centers including:

• Unit swap out
• Repairing of mechanical faults
• Basic modular troubleshooting
• Testing and verification of unit functionality
• Initiate warranty claims and send faulty modules to Level 3 or 4 repair 

centers.

Conventions

Special characters and typefaces, listed and described below, are used in this 
publication to emphasize certain types of information. 

➧

Note: Emphasizes additional information pertinent to the subject 
matter.

G

Caution: Emphasizes information about actions which may result in 
equipment damage.

Summary of Contents for MOTO U9

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands