6809513A81-A
April 01, 2008
25
Level Service Manual
Disassembly
Removing the Hinge Assembly
1.
Remove the battery cover, battery, SIM and PCB from the housing as described in the
procedures.
2.
Hold flip with one hand, and press hinge with a metal stick as indicated in figure 9.
Press
to the end, remove the assembly.
3.
To replace, insert the side buttons into its slots.
4.
Align and insert the transceiver board assembly into the rear housing.
5.
Carefully and gently place the side key flex into the designated slot and the transceiver
board into position.
6.
Carefully align the flex cable connector to the socket and then gently but firmly seat the
connector into its socket.
7.
Replace the rear housing, SIM, battery, and battery cover as described in the procedures.
G
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
G
For this operation the disassembly tool must be have a lever movement to avoid
damage to the connector or electronic components.
Figure 9. Separating the Flip Assembly from the Xcvr Assembly
