32
April 01, 2008
6809513A81-A
Disassembly
1 and 2
6.
To replace, carefully align & lower the flip board assembly onto the flip front housing.
7.
Insert the vibrator module into its slot and gently press downwards to ensure it sits properly
on the housing.
8.
Press the camera module connector into its socket on the flip board assembly.
9.
Reconnect the flip flex connector to its socket on the flip board assembly.
10. Align the lower 2 tips of the display bracket into the 2 stoppers on the flip front housing.
Carefully lowered the display bracket & press gently downwards along the sides of the
bracket to engage the 6 latches.
11. Replace the flip housing, front housing, transceiver board, rear housing, SIM, battery and
battery cover as described in the procedures.
